6-cassette DADANT honey extractor Ø1000mm, electric drive, OPTIMA
Description:
These honey extractors are intended for both stationary and nomadic apiaries. Battery powered (12V) allows the centrifugation of honey everywhere where there is no access to the 230V network. These honey extractors have the possibility of working in manual and automatic mode.
Construction:
The drum is made of acid-proof stainless steel 0H18N9, properly reinforced and stiffened.
Basket made of stainless, acid-resistant rods, equipped with cassettes, the construction of which allows the frames to be protected against breakage of the patches. The cassettes are connected with each other by special guides, which preclude clamping of cassettes and springs, which allow return to the initial position. The basket is additionally mounted in the upper and lower cast.
The safety lock mounted on the lid of the honey extractor stops the honey extractor operation when the lid is opened during centrifugation.
Transparent cover made of metaplex giving the opportunity to observe the spinning process without opening and risking contact with the rotating basket.
DATA SHEET
product line | OPTIMA |
Type of extractor | 6-cassette |
Frame type | 6× Dadant, 6× Warszawska Poszerzana |
Drum diameter[mm] | Ø1000 |
Drive system | Electric bottom |
Power supply | 12/230V |
Controller | HE-01U |
Motor | Belt ratio 24V / 350W |
Sheet thickness | 0,6 mm |
Cover | 4 mm |
Honey gate | Stainless 2x 2" |
Top bar | Flat bar 60×10 mm, powder coated |
Legs | Powder coated 50x30 mm |
Hinges | Plastic 8 szt. |
Drum height | 730 mm |
Drum rim | Powder coated |
Reinforcing frame | Powder coated |
Cassette material | Stainless rod Ø2 mm and Ø5 mm |
Other | Shipped on pallet |
Warranty | 3 years |
* Warranty | for electrical components, controller, motor and drive elements - 2 years |